Faucet and fixture replacement in Dallas: sink faucets, valves and showerheads
A new faucet or showerhead is a small job that is easy to get almost right. We match it to the valve, the sink and the stops so it does not drip or leak in a year.
Updated October 2026. Service office: 2353 Bryan St, Dallas. Phones answered 24/7.
Faucets, valves and showerheads we install in Dallas bathrooms include Moen, Delta, Kohler, Grohe and Hansgrohe.
Faucet and fixture replacement in Dallas swaps sink faucets, shower valves and trim, and showerheads or handhelds, usually without opening a wall unless the valve body itself has failed. Market data puts a shower fixture set at roughly 50 to 900 dollars. The key is matching the new trim to the existing valve or replacing the valve while the wall is open.
What a faucet or fixture swap actually involves
A sink faucet is the simple one: shut the stops, disconnect, remove the old faucet, set the new one on a clean deck and reconnect. We replace the supply stops and lines while we are there, because old stops often fail to close or start to drip once they are turned.
Shower trim is trickier. The handle and plate you see sit on a valve inside the wall, and trim from one brand rarely fits another's valve. A Moen or Delta trim kit matched to the existing body is a quick visit; a new look on a different brand means a new valve.
Showerheads and handhelds are the easy win for pressure and comfort, as long as the arm threads and the flow rating suit the house.
The three fixture jobs we do most
Sink Faucet Replacement
Bathroom faucets come in single-hole, 4-inch centerset and 8-inch widespread patterns, and the new faucet has to match the holes in the sink or top, or come with a deck plate to cover them. We remove the old faucet and pop-up drain, clean the deck, and install the new faucet and drain with fresh supply lines and quarter-turn stops. Each connection is checked under pressure, and the drain is run to confirm the pop-up seals. Most swaps take under two hours.
Shower Valve and Trim Kit
When a shower drips from the head, runs scalding when a toilet flushes, or the handle is stiff, the cartridge or the valve is worn. Often the cartridge can be replaced through the trim plate. When the valve body is old, corroded or an obsolete brand, it is replaced, which means opening the wall, ideally from a closet behind it. A new pressure-balance or thermostatic valve protects against temperature swings, and the trim kit is ordered to match that exact valve.
Planning range, shower fixture set (faucet and head): $50 to $900.
Showerhead and Handheld Upgrades
A new showerhead can change a shower more than any other fixture: wider spray, better pressure feel, or a rain head mounted on a longer arm. A handheld on a slide bar adds flexibility for rinsing, cleaning and seated showers, and a diverter lets the fixed head and handheld share one valve. We check the arm threads, seal the connection, and choose flow ratings that suit the water heater so the shower does not run cold halfway through a long morning.
What decides the cost of a fixture replacement
The fixture is usually the smaller part. These six items move the total.
Planning range, shower fixture set (faucet and head): $50 to $900. Market data, not a quote.
Fixture quality
Solid brass bodies and ceramic cartridges cost more and last longer.
Sink hole pattern
A mismatched pattern needs a deck plate or a new top.
Shower valve or trim only
Trim over an existing valve is quick; a new valve opens the wall.
Wall access
Access from a closet side avoids retiling.
Supply stops
Old stops are replaced with quarter-turn valves.
Finish
Matte black and brushed brass cost more than chrome.
When a fixture swap needs a permit in Dallas
Dallas treats cosmetic bathroom work, including replacing fixtures in the same location without moving plumbing or electrical, differently from a remodel that moves things. A like-for-like faucet or showerhead swap stays on the simple side. Moving a sink, adding a second faucet or relocating a shower valve is plumbing work that needs a permit. We will tell you which side your job falls on before we start.
How a faucet or fixture replacement runs
- 1
Call and describe the fixture
What it is doing and what you want.
- 2
Identify the valve
Brand and model of the existing valve found.
- 3
Choose the fixture
Faucet, trim or head matched to what is there.
- 4
Shut off and remove
Water off, old fixture and stops out.
- 5
Install
New fixture, stops and lines fitted.
- 6
Pressure check
Every connection checked for leaks.
- 7
Walkthrough
Temperature, flow and drain checked with you.
Replacing a fixture yourself versus having us do it
| Task | Doing it yourself | Having us do it |
|---|---|---|
| Showerhead swap | Very doable with thread tape | Done with the flow matched to the heater |
| Sink faucet | Doable if the stops close | Stops and lines replaced too |
| Shower cartridge | Brand and model must match exactly | Identified and replaced |
| Shower valve body | Soldering or crimping inside a wall | Replaced and pressure-tested |
| Moving a fixture | Needs a Dallas plumbing permit | Permitted and inspected |
Signs a faucet or shower valve needs replacing
Drip that will not stop
A worn cartridge or seat.
Temperature swings
Hot or cold bursts when other fixtures run.
Stiff or loose handle
A worn cartridge or stripped stem.
Low flow at one fixture
Mineral buildup or a failing cartridge.
Water at the base
A failed seal under the faucet.
Corroded finish
Pitting or flaking finish on old fixtures.
Parts no longer made
An obsolete valve with no cartridge available.
Faucet and fixture questions
Something else? Call and ask, any hour.
No; trim has to match the valve brand and model.
The valve lacks pressure balancing or its cartridge is worn.
Yes, ideally from a closet side rather than through tile.
If the hole pattern matches, or with a deck plate.
Old stops often fail to close or start dripping once turned.
Usually under two hours.
Yes, usually with a diverter at the arm.
More Vanities, Fixtures & Lighting work we do in Dallas
Bathroom Vanity Installation
Double Vanity Installation and more, in Dallas.
Learn moreToilet Installation and Replacement
Comfort-Height Replacement and more, in Dallas.
Learn moreBathroom Lighting Installation
Vanity and Mirror Lighting and more, in Dallas.
Learn moreFrom our guides
Get the right fixture on the right valve
Call and describe the faucet or shower and what it is doing. We will identify the valve and tell you whether it is a trim swap or a new valve.
2353 Bryan St, Dallas, TX 75201