ADA restroom compliance work in Dallas for existing business restrooms
Turning space, grab bars at the right height, fixtures a wheelchair user can reach and a door that opens without a fight, built to the published dimensions.
Updated October 2026. Service office: 2353 Bryan St, Dallas. Phones answered 24/7.
Accessible fixtures and accessories we install in Dallas include Bobrick grab bars and accessories, Kohler and American Standard ADA-height toilets and lavatories, and Sloan flush valves.
ADA restroom compliance work in Dallas rebuilds an existing business restroom to the published accessibility dimensions: a 60-inch turning circle, grab bars at 33 to 36 inches, a toilet seat at 17 to 19 inches, knee clearance under the lavatory and lever door hardware. We build to the ADA and Texas Accessibility Standards; formal reviews are done by an accessibility specialist where required.
What accessibility work in a business restroom covers
Accessible restrooms are defined by measurements. The standards set clear floor space for a wheelchair to turn, heights for toilets, grab bars, lavatories, mirrors and dispensers, and how much force a door can take to open.
Most existing restrooms miss on a handful of those: grab bars at the wrong height or length, a lavatory with pipes where knees need to go, a mirror mounted too high, a stall too narrow, or a round door knob.
We survey the room against the dimensions, fix what can be fixed in place, and rebuild what cannot, usually the stall or the lavatory wall. Accessories from Bobrick and ADA-height Kohler or American Standard fixtures cover most of the fixture side.
Quick corrections or a restroom rebuild?
| Quick corrections | Rebuild | |
|---|---|---|
| Typical items | Hardware, bars, accessories, signage | Stall size, fixture location, door opening |
| Walls opened | Only for grab bar backing | Partitions or walls moved |
| Permits | Often lighter | Building and plumbing permits |
| Downtime | Hours to a day | Days, phased where possible |
| Cost | Lower | Higher |
| Result | Fixes common misses | Brings the whole room to dimension |
The three parts of most accessibility upgrades
Turning Clearances and Door Hardware
A wheelchair user needs a clear turning space, usually a 60-inch circle or a T-shaped space, inside the restroom or accessible stall, and a door opening at least 32 inches clear. Doors need lever or push hardware rather than knobs, a closer that does not slam, and clear floor on the pull side. When the room is too tight, we move a partition, flip a door swing or relocate a fixture to open the space, and replace hardware and closers while we are at it.
Fixture Heights, Grab Bars and Mirrors
The accessible toilet sits with its seat 17 to 19 inches off the floor, centered 16 to 18 inches from the side wall, with a 42-inch grab bar on that side wall and a 36-inch bar behind, both mounted 33 to 36 inches high into solid backing. The flush control goes on the open side. Mirrors are set with the bottom of the reflecting surface no higher than 40 inches. Where these are off, we reset fixtures on carriers or new flanges and add blocking for the bars.
Signage, Accessories and Lavatory Clearances
The lavatory needs its rim no higher than 34 inches, knee clearance underneath, and insulated or covered pipes so a seated user is not burned or scraped. Faucets need lever or sensor controls. Soap, towel and seat-cover dispensers are mounted within reach ranges, and nothing projects into the path of travel. Restroom signs with tactile characters and braille go on the latch side of the door at the right height. These are often the quickest and least disruptive items to correct in an existing restroom.
What decides the cost of accessibility work
A few items drive most of the cost; many corrections are small.
Stall or room size
Enlarging a stall means moving partitions or walls.
Fixture moves
Relocating a toilet for side-wall distance adds plumbing work.
Door changes
Widening an opening needs framing; hardware swaps do not.
Lavatory rebuild
Knee clearance may need a new wall-hung lavatory.
Backing for bars
Opening walls to add blocking adds patching.
Accessories and signage
Usually the lowest-cost corrections.
Permits for accessibility work in Dallas
Accessibility changes that move walls, doors or plumbing in a Dallas business restroom go through the city's DallasNow permitting portal, like other building and plumbing work. Simpler corrections, such as replacing door hardware, moving accessories or re-mounting grab bars on proper backing, are lighter and can often be done in a single evening. We tell you which items need permits before work starts, so the schedule does not stall halfway.
What an accessibility upgrade typically checks and corrects
- Door clear width, hardware and closer
- 60-inch turning space or T-turn
- Toilet seat height and side-wall distance
- Grab bar lengths, heights and backing
- Lavatory height, knee clearance and pipe covers
- Mirror, dispenser and accessory heights
- Tactile signage location
How accessibility work runs
- 1
Call and describe the restroom
Business type and known issues.
- 2
Survey
Clearances, heights and hardware measured.
- 3
Prioritize
Quick corrections separated from rebuilds.
- 4
Permits
Filed for wall, door or plumbing changes.
- 5
Rebuild
Partitions, fixtures and backing reworked.
- 6
Fixtures and accessories
Mounted to the published heights.
- 7
Walkthrough
Measurements rechecked with you.
ADA restroom questions
Something else? Call and ask, any hour.
No; we build to the dimensions, and an accessibility specialist reviews where required.
Grab bar height, lavatory knee clearance, mirror height and door hardware are frequent misses.
33 to 36 inches above the floor to the top of the gripping surface.
Often, by moving partitions, flipping the door or changing fixtures.
Yes, to keep the business running.
Texas has its own Texas Accessibility Standards, closely aligned with the ADA.
Yes; see commercial restroom remodels.
More Commercial Restrooms work we do in Dallas
Commercial Restroom Remodel
Office and Clinic Restrooms and more, in Dallas.
Learn moreMulti-Family Bathroom Renovation
Apartment Unit Turns and more, in Dallas.
Learn moreFull Bathroom Remodel
Gut Renovation to the Studs and more, in Dallas.
Learn moreFrom our guides
Get the restroom measured
Call and tell us about the restroom and any issues already flagged. We will measure it against the dimensions and separate the quick fixes from the rebuilds.
2353 Bryan St, Dallas, TX 75201